Excerpts from the conference
Tuesday, July 3
![](images/conference/DSC_0173.jpg)
Madjid Fathi-Torbaghan, Institute of Knowledge Based Systems and Knowledge Management, University of Siegen, Germany
![](images/conference/DSC_0172.jpg)
Prof. Dr. Hamid Garmestani,
Georgia Institute of Technology, USA
![](images/conference/DSC_0174.jpg)
Dr. Reinhardt Michael,
Ministry of Innovation, Science, Research and Technology of the State of
North Rhine-Westphalia, Germany
![](images/conference/DSC_0179.jpg)
Dr. Bernd Emonts,
Research Centre Jülich, Germany: "Fuel Cells -Status and Development Demands of a Future Energy Conversion Technology"
![](images/conference/DSC_0206.jpg)
Dr. Bernhard Sepeur-Zeitz, Volkswagen AG, Germany: "Nanotechnology in Automotive Engineering"
![](images/conference/DSC_0223.jpg)
Chair: Univ.-Prof. Dr.-Ing. habil. Bernhard Wielage, Technical University Chemnitz, Germany
![](images/conference/DSC_0212.jpg)
Dr. Moe Khaleel, Pacific Northwest National Laboratory Energy Science and Technology Division, USA: "Recent Development in High Temperature Fuel Cell Systems"
![](images/conference/DSC_0225.jpg)
Zohreh Razavihesabi, Sharif University of
Technology, Iran: "An investigation on the hot deformation of Al-5vol%Al2O3 nanocomposite"
![](images/conference/DSC_0226.jpg)
Session Chair: Saeid Nahavandi, DEAKIN, Australia: "Knowledge Management & Intelligent Systems,
Session 2.1 KM in Practice I - Power"
![](images/conference/DSC_0228.jpg)
Sebastian Rohr, Microsoft Deutschland GmbH, Germany: "Sharing - the secure way – Knowledge Protection and Access Control"
![](images/conference/DSC_0199.jpg)
Session 1.2 Nanotubes: T. Shokuhfar, University of Aveiro, Portugal: "Effect of freeze granulation on performance of HA/PMMA/Carbon nanotubes bone cement"
Wednesday, July 4
![](images/conference/DSC_0097.jpg)
Robert L. Snyder,
Georgia Institute of Technology, USA,
Materials Science and Engineering: "The new world of MSE: Nano & Bio Technology"
![](images/conference/DSC_0102.jpg)
Dr. Lutz-Eike Elend,
AUDI AG, Germany,
Head of Lightweight-Technology and Process Development Aluminium - and Lightweight centre: "Key technologies and materials for future automotive applications"
![](images/conference/DSC_0124.jpg)
Dr.-Ing. Guntram Wagner,
University of Kaiserslautern, Germany: "Ultrasonic Metal Welding of Fiber-Reinforced Polymers"
![](images/conference/DSC_0126.jpg)
Rina Tannenbaum,
Georgia Institute of Technology, USA: "Design of Interfacial Morphology in Inorganic/Organic Nanocomposites"
![](images/conference/DSC_0130.jpg)
Andreas Graichen,
3M Deutschland GmbH, Germany,
3M Fuel Cell Components: "Advanced Catalyst Technology with Enhanced Performance and Durability"
Thursday, July 5
Ralf Montino, Elmos AG, Germany: "Mini Track,
New Methods of Knowledge Extraction in the High Tech Industry"
General Meeting
![](images/conference/DSC_0182.jpg)
Prof. Dr. Jagannathan Sankar, North Carolina A&T State University, USA
Impressions from the General Meeting
(next 6 pictures below)
![](images/conference/DSC_0184.jpg)
![](images/conference/DSC_0186.jpg)
![](images/conference/DSC_0173001.jpg)
![](images/conference/DSC_0179001.jpg)
![](images/conference/DSC_0180001.jpg)
![](images/conference/DSC_0181001.jpg)
Impressions from the General Meeting
(6 pictures above)
Friday, July 6
![](images/conference/DSC_0225-2.jpg)
Dipl.-Inform. Manuel Neubach, Ruhr University Bochum,
Germany
: "A Generic Knowledge Based Product Configuration Software and Services for
Virtual Products"
![](images/conference/DSC_0235.jpg)
Dr. Saeid Nahavandi (Alfred Deakin
Professor), Intelligent Systems Research Lab., Deakin University,
Australia: "Knowledge Management in product design and process control through
simulation modeling analysis"
Title of Arno's Presentation:
"Nano Technologies:
The needed accelerator for Hydrogen and Fuel Cells
or:
Why Hydrogen and Fuel Cells need to be accelerated by Nano Technologies"
July 05, 09:00 – 10:00
Download the Manuscript (pdf) |